UTM-00330
|
Rev 5
Page
48
of
91
DetNet South Africa Copyright © 2019
This function enables the user to search for connected DigiShot
®
Plus detonators and to compare the results
of the search against the stored Detonator List. It performs the same steps as an Autosearch except for the
following:
Check Pattern does not overwrite the Detonator List.
Check Pattern generates a list of detonators that should correlate with the existing detonator list.
Check Pattern generates a list of Missing detonators that were not found when compared to the
detonator list.
Check Pattern generates a list of new detonators found during test, which were not part of the original
detonator list before the test.
Parameters for check pattern will be determined automatically from the list. However, the Autosearch
settings parameters still applies here.
1. Main Menu
Press
to select Test Menu
2. Test Menu
Press
to select
Check Pattern
3. Channel selection
Use the numerical keypad to enter Channel number
Press
to continue.
A warning will be displayed if any discrepancies are found once the Check Pattern
function has completed.
