UTM-00330
|
Rev 5
Page
45
of
91
DetNet South Africa Copyright © 2019
6. Autosearch -Untagged detonator
The Tagger will check for Untagged dets and will
automatically stop when an untagged detonator is
located.
Press
to continue.
7. Autosearch
Autosearch will only search from the first to the last row, and will search up to the
special detonators as specified.
The Tagger will create a new detonator list from the search results.
Each detonator is individually checked, starting from the start row e.g. Row 1, Hole 1,
Det 1. Depending on the search parameters and whether a detonator is found or not,
searching may continue in the same hole, or move to a new hole, a new side or a new
row.
To ensure that the search is performed as rapidly as possible, it will proceed to a new
hole, side or row after a selected number of bad detonators or holes are exceeded.
These parameters are adjustable in the autosearch limits section.
Autosearch will not search outside the specified parameters. Detonators connected
outside the specified parameters will not be found or added to the detonator list.
Ensure all possible parameters are included or the total number of connected
detonators will differ from the tagged number of detonators.
Autosearch can search beyond bad or missing holes and rows depending on how the
Tagger is setup for Autosearch
Refer to Autosearch Limits section found under the DigiShot Setup menu for detailed
information.
