UTM-00330
|
Rev 5
Page
23
of
91
DetNet South Africa Copyright © 2019
1. Press the ON
key.
2. The splash screen will display for approximately 1.5 seconds during the tagger
boot sequence.
3. The system name is displayed.
4. The software release and hardware version number is displayed.
5. The user must acknowledge the disclaimer before proceeding.
6. Acknowledge by pressing the
Soft Key.
7. Use the numerical keypad to enter the password.
8. Press
to continue.
The charging screen is only displayed when the tagger is plugged into a USB,
Wireless charger, external battery pack, or charging source . Pressing ESCAPE
returns the user to the original screen and prevents this screen being shown again
until the next power-on sequence.
To prevent unauthorised use, the DigiShot
®
CE4 Tagger is assigned a default
password by the manufacturer. The default password may be changed by the user
and can be configured from the “Settings” menu. The user may reset the password
with a ticket retrieved from DetNet Portal. Entering value 0 as a password will remove
the password-required step when starting the device.
Release 34374B
Hardware ver .3
