6
2.3
Rear Panel
The rear panel connections are shown below:
No.
Name
Description
1
VIDEO-IN (BNC)
Connect camera. (Supports NTSC/PAL)
2
LOOP-OUT
Camera images of each channel will be outputted as is. It is also used when
the corresponding image is required for other products (8 /16 channel has no
LOOP-OUT).
3
MON-OUT
Connect to the main monitor for camera image for
surveillance/management/playback.
4
SPOT-OUT
Used to output the entire surveillance screen one by one, in an interval.
5
S-VIDEO
Connect to the S-Video input terminal to output the image on the main monitor.
6
Select NTSC / PAL
Select the signal system. (NTSC / PAL)
7
AUDIO IN
Connect Audio Input Device. (with Amp.)
8
AUDIO OUT
Connect Audio Output Device. (with Amp.)
9
ALARM/ SENSOR
/RS-485
Use this terminal to connect external input sensors on channels 1~4. (Supports
N/O or N/C) Connect the RS-485 signal output, or the relay for P/T/Z camera
control.
10
VGA Port
Connect to the PC Monitor.
11
LAN Port
10/100 Ethernet connection terminals for remote connection.
12
Power Input
Power cable connection terminal for connecting to the main power.
13
Power Switch
Switch to change input power. (115/230V)
14
USB Port
USB interface Port to connect to external storage equipment.
Summary of Contents for VCD304161
Page 4: ......
Page 8: ......
Page 46: ...37 Enter a new password After entering the password re enter the same password again ...
