79
8.5
How to setup cont motion alarm recording.
With firmware v1.16, the VCD 300 series can be set to record on cont motion recording at the same time. The
advantage of this is to provide a continuous live feed for remote viewing (at a low IPS), while at the same time enabling
motion alarm recording (at a higher IPS).
DVR Configuration:
1.
Schedule CM Recording:
a) Press the SETUP button.
b) Move to the Camera menu and select Schedule. Press Enter
c)
Check the cameras to schedule and press OK.
d) On the schedule for the selected cameras change the contents of the boxes to CM. To change the entire
schedule to CM, move the cursor to the empty box on the top left corner of the schedule and keep pressing
Enter until all the squares say CM. Press OK
Summary of Contents for VCD304161
Page 4: ......
Page 8: ......
Page 46: ...37 Enter a new password After entering the password re enter the same password again ...
