manualshive.com logo in svg

Digimerge VCD304161, Installation And User Manual

Share
Download
Digimerge VCD304161 Installation And User Manual Download Page 57

48

 

 

 

5.10

 

Camera-Schedule 

Set the recording schedule for each camera. Select the camera to set the schedule. 
 

 

 
The following picture shows the status of schedule setup for all cameras.    The number indicates the time. 
Recording schedule can be set per hour. The “initial” indicates the status of recording. The status of recording will be 
displayed on the upper right of each channel when the live channel is seen. 

 

 
 

 

 
The contents for each initial is as following. 

1)  c: Continuous : Continuous recording 
2)  m: Motion detection : Motion detection recording 
3) 

a: Alarm-activated : Alarm-activated recording   

4)  ca : Cont Alarm-activated recording 
5)  ma : Motion det Alarm-activated recording 
6)  cm: Cont Motion detection recording   

 

Note 

1. 

If the recording is done with ca or ma, the recording will be recorded in continuous or in motion detection. 
When the alarm activates, concentrated recording will be done according to the set IPS on the alarm.   

2. 

If cm recording is done, the motion alarm must be turned On in order to record at the IPS set in the 
motion alarm menu (Setup

Æ

Alarm

Æ

Motion Alarm). See Appendix II 8.5 for details. 

 

Summary of Contents for VCD304161




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands