56
5.15
Alarm-Motion Alarm
Set the alarm activation, recording frame and time for motion detected on the camera image. This can be set while using
the Motion Alarm.
5.15.1. On/Off
Select whether or not to activate the motion detection alarm for each channel.
5.15.2. Out
Select the connected number (1,2 or none) of outputs (relay) to use when the alarm activates.
5.15.3. IPS
Set the number of frames for the camera image connected while the alarm is activated. Each camera can be set for a
different number of frames.
5.15.4. Dwell
Set the period of recording when motion ends after motion activates. This is different from the Dwell time in [Alarm In/Out]
category. The Dwell time in [Motion Alarm] category is a period of recording from the point when the motion disappears
after motion activation.
5.15.5. Pre-Alarm
Sets recording time just before perceiving alarm input. The Pre-Alarm time is the opposite of Dwell time, and records the
time before motion activation.
For example, Pre-Alarm is set as 20 seconds. If the alarms activates at 14:30:00 on 14th of February, the recording starts
from 14:29:40 on 14th of Feb.
Summary of Contents for VCD304161
Page 4: ......
Page 8: ......
Page 46: ...37 Enter a new password After entering the password re enter the same password again ...
