57
5.16
Alarm-Video Loss
Set to display the alarm when the connected camera (BNC cable) is disconnected or has been pulled off accidentally.
5.16.1. On/Off
Select whether or not to use the Video Loss connected with each channel.
5.16.2. Alarm Out
Select the connected number (1,2 or number) to use when activating the alarm.
5.16.3. Dwell
Set the period for the alarm output while the Video Loss is activating.
5.16.4. Pre-Alarm
Set the recording time before perceiving the Video Loss. The Pre-Alarm time is the opposite of Dwell time, and records
the time before the Video Loss activates.
For example, Pre-Alarm is set as 20 seconds. If the alarms activates at 14:30:00 on 14th of February, the recording starts
from 14:29:40 on 14th of Feb.
5.17
Alarm-Smart Alarm
The user can set the Smart Alarm indication and alarm dwell time relating to the hard disk pre-hand before the error or
problem occurs on the hard disk installed.
5.17.1.
Smart Alarm
Select whether or not to use the Smart Alarm.
5.17.2. Alarm Out
Select the connection number (1, 2 or None) of outputs (relay) used while activating the alarm.
5.17.3. Dwell Time
Set the alarm activating time shown on the screen when an error has occurred on the hard disk.
Summary of Contents for VCD304161
Page 4: ......
Page 8: ......
Page 46: ...37 Enter a new password After entering the password re enter the same password again ...
