54
Advanced Recording
Advanced Recording
Alarm Setup Mode
The Alarm Setup section controls the Recording
settings for each camera individually (quality,
resolution, frame rate and audio). Recording
Settings for external alarm detection are set in
this menu.
•
PARAMETER MODE
- Contains the general
recording parameters for each camera.
•
SCHEDULE MODE
- Contains the schedule
recording settings for each camera.
Alarm Parameter
Parameters for each camera are set by hour
using the Time Interval bar. Hours can be
selected individually or in groups (by clicking and
dragging several blocks).
NOTE:
If Schedule Mode was set to Weekly
earlier, a day selection option is available.
Alarm Parameter
Select an Hour (highlighted in ORANGE), and
press ENTER again to open the Camera
Settings for the selected hour, or select multiple
blocks in a row and press ENTER.
Once a time block or several blocks have been
selected, the Channel Setup window is
displayed.
•
Size
- Sets the video capture size for each
camera to 352x240, 704x240 or 704x480.
•
FPS
- Sets the Frames Per Second for
recording for each channel. Each channel
can be set to 1, 2, 3, 7, 15 or 30 Frames per
second (real time video capture) from a
shared pool of 240 FPS. If the FPS drops
below 0, the settings will not be saved.
•
Quality
- Sets the video recording quality to
Low, Standard, High or Highest.
•
Audio
- Turns audio recording ON/OFF for
4 channels ONLY.
Once settings have been adjusted for the hour,
the changed time block will be displayed in a
different color on the Time Interval bar.
NOTE
: Each different configuration will be
displayed as a different color on the bar.
Selected Block of Hours
