Digilent Cora Z7, Reference Manual

Page: 7 / 23

7/30/2019 Cora Z7 Reference Manual [Reference.Digilentinc]
https://reference.digilentinc.com/reference/programmable-logic/cora-z7/reference-manual?_ga=2.21685883.1349070004.1564406803-1961480359.1… 7/23
Supply Circuits Device
Maximum
Current
5.0V Onboard Regulators, Arduino/chipKit Shield Connector, RGB
LEDs IC4: ON Semiconductor
NCP380
3.3V FPGA I/O, USB port, Ethernet IC15: Dialog Semiconductor
DA9062 2A
1.0V FPGA, Ethernet IC15: Dialog Semiconductor
DA9062 2.5A
1.8V FPGA Auxiliary, USB port, Ethernet IC15: Dialog Semiconductor
DA9062 1.5A
1.35V FPGA, DDR3L memory IC15: Dialog Semiconductor
DA9062 2.5A
1.8V FPGA XADC IC15: Dialog Semiconductor
DA9062 100mA
Table 1.1. Cora Z7 Power Rails.
With JP3 set to “USB”
The Zynq APSoC is divided into two distinct subsystems: The Processing System (PS) and the Programmable Logic (PL). Figure 2.1 shows
an overview of the Zynq APSoC architecture, with the PS colored light green and the PL in yellow. Note that the PCIe Gen2 controller and
Multi-gigabit transceivers are not available on the Zynq-7010 or Zynq-7007S devices.
1)
1)
2 Zynq APSoC Architecture