Interfaces
TransPort LR User Guide
40
l
WPA2-Enterprise
: This security method is designed for enterprise networks and requires
a RADIUS authentication server. This security method requires a more complicated setup,
but provides additional security. Various kinds of the Extensible Authentication Protocol
(EAP) are used for authentication.
l
WPA/WPA2-Enterprise
: This security method is designed for enterprise networks and
requires a RADIUS authentication server. This is a mixed mode method, providing WPA
with TKIP encryption or WPA2 with AES encryption supported by the Access Point.
n
A description of the Wi-Fi Access Point.
From the command line
To configure a Wi-Fi 2.4 GHz Access Point, the command-line command is
To configure a Wi-Fi 5 GHz Access Point, the command-line command is
.
The following steps show using the
command. When configuring a Wi-FI 5 GHz
Access Point, use the
command. The parameters are the same.
1. Enable the Wi-Fi Access Point.
wifi 1 state on
2. Enter the SSID for the Wi-Fi Access Point.
wifi 1 ssid LR54-AP1
3. Enter the password for the Wi-Fi Access Point.
wifi 1 password your-password
4. Optional: Enter the security for the Wi-Fi Access Point.
wifi 1 security wpa-wpa2-personal
5. Optional: Enter a description for the Wi-Fi Access Point.
wifi 1 description “Office AP”
Related topics
Configure a Wi-Fi access point with WPA2-Enterprise or WPA-WPA2-Enterprise security on page 41
Show Wi-Fi status and statistics on page 42
Related commands
