Command descriptions
TransPort LR User Guide
160
alternate-after
The time, in seconds, to wait before sending probe packets to an alternate probe when the primary
probe fails.
Accepted value is any integer from 0 to 3600. The default value is 0.
alternate-probe-host
When alternate-after is non-zero, this IPv4 address is used as an alternate address when probes fail
on the host configured device.
Value should be a fully qualified domain name.
switch-primary-up
The primary interface up time, in seconds, to wait before switching back from the from the backup
WAN interface to the primary WAN interface.
Accepted value is any integer from 0 to 3600. The default value is 0.
switch-after
The failover time, in seconds, to wait before reattempting to return to the primary WAN interface.
Accepted value is any integer from 0 to 86400. The default value is 0.
probe-timeout
The timeout period, in seconds, for each probe packet.
Accepted value is any integer from 1 to 60. The default value is 1.
