Command descriptions
TransPort LR User Guide
143
cellular
Configures a cellular interface.
Syntax
cellular <1 - 2> <parameter> <value>
Parameters
state
Enables or disables the cellular interface, or enables it as an on-demand interface. The 'on-demand'
setting allows configuring the cellular interface as an on-demand interface. An on-demand interface
is brought up as needed if a higher priority goes down.
Accepted values can be one of off, on or on-demand. The default value is off.
description
A description of the cellular interface.
Accepted value is any string up to 63 characters.
apn
The Access Point Name (APN) for the cellular interface.
Accepted value is any string up to 63 characters.
apn-username
The username for the APN.
Accepted value is any string up to 63 characters.
apn-password
The password for the APN.
This element is available to all users.
Accepted value is any string up to 128 characters.
preferred-mode
The preferred cellular mode for the cellular interface.
Accepted values can be one of auto, 4g, 3g or 2g. The default value is auto.
connection-attempts
The number of attempts to establish a cellular connection. After this number of attempts, the cellular
module is power cycled, and the device attmpts to make a cellular connection again.
Accepted value is any integer from 10 to 500. The default value is 20.
Examples
n
cellular 1 state on
Enable the Cellular 1 interface.
