Digi TransPort LR54-AA401 User Manual Download Page 139

Page: 139 / 169

Command descriptions

TransPort LR User Guide

186

show eth

Displays Ethernet interfaces status and statistics.

Parameters

description

A description of the Ethernet interface.

admin-status

Whether the Ethernet interface is sufficiently configured to be brought up.

oper-status

Whether the Ethernet interface is up or down.

uptime

Amount of time the Ethernet interface has been up.

mac-address

The MAC address, or physical address, of the Ethernet interface.

link-status

The current speed and duplex mode of the Ethernet interface.

link-speed

The current speed of the Ethernet interface.

link-duplex

The current duplex mode of the Ethernet interface.

rx-unicast-packets

The number of unicast packets transmitted on the Ethernet interface.

tx-unicast-packets

The number of unicast packets transmitted on the Ethernet interface.

rx-broadcast-packets

The number of broadcast packets received on the Ethernet interface.

tx-broadcast-packets

The number of broadcast packets transmitted on the Ethernet interface.

rx-multicast-packets

The number of multicast packets received on the Ethernet interface.

Summary of Contents for TransPort LR54-AA401










































































































































































Search results

Summary of Contents for TransPort LR54-AA401

Reviews:

Related manuals for TransPort LR54-AA401

Brands by name

Popular brands

Digi TransPort LR54-AA401, User Manual

Search results

Summary of Contents for TransPort LR54-AA401

Reviews:

Related manuals for TransPort LR54-AA401

Brands by name

Popular brands