Command descriptions
TransPort LR User Guide
154
mtu
Maximum Transmission Unit (MTU) for this DSL interface.
Accepted value is any integer from 128 to 1500. The default value is 1500.
delay-up
Delays the DSL interface from coming up for this number of seconds. This delay allows the DSL
provider network to propagate network changes after the device has connected to the network, and
before packets can be sent and received. This delay prevents the device from assuming the network
is fully operational before it actually is fully operational, which could in turn cause problems with
other features, such as interface failover. During this delay, the DSL??LED flashes, to indicate the
interface is not fully up. Because characteristics can differ among provider networks, use of this
parameter is provider-specific.
Accepted value is any integer from 0 to 60. The default value is 0.
Examples
n
dsl vpi 0
Set the DSL Virtual Path Identifier to 0.
n
dsl vci 38
Set the DSL Virtual Channel Identifier to 38.
n
dsl encapsulation pppoa-vcmux
Set the DSL encapsulation type to 'PPPoA, VC-Mux.'
n
dsl ppp-username my-username
Set the DSL account login username to 'my-username.'
n
dsl ppp-password my-password
Set the DSL account login password to 'my-password.'
n
dsl mode auto
Allow the DSL interface to train to any available line mode.
n
dsl mode gdmt
Force the DSL interface to train only in G.dmt mode, or not at all.
n
dsl state on
Enable DSL interface.
