Digi TransPort LR54-AA401 User Manual Download Page 146

Page: 146 / 169

Command descriptions

TransPort LR User Guide

193

show ipstats

Displays system-level Internet Protocol (IP) status and statistics.

Parameters

rx-bytes

Number of bytes received.

rx-packets

Number of packets received.

rx-multicast-packets

Number of multicast packets received.

rx-multicast-bytes

Number of multicast bytes received.

rx-broadcast-packets

Number of broadcast packets received.

rx-forward-datagrams

Number of forwarded packets received.

rx-delivers

Number of received packets delivered.

rx-reasm-requireds

Number of received packets that required reassembly.

rx-reasm-oks

Number of received packets that were reassembled without errors.

rx-reasm-fails

Number of received packets for which reassembly failed.

rx-discards

Number of received IP packets that have been discarded.

rx-no-routes

Number of received packets that have no routing information associated with them.

rx-address-errors

Number of received packets containing IP address errors.

Summary of Contents for TransPort LR54-AA401










































































































































































Search results

Summary of Contents for TransPort LR54-AA401

Reviews:

Related manuals for TransPort LR54-AA401

Brands by name

Popular brands

Digi TransPort LR54-AA401, User Manual

Search results

Summary of Contents for TransPort LR54-AA401

Reviews:

Related manuals for TransPort LR54-AA401

Brands by name

Popular brands