Command descriptions
TransPort LR User Guide
215
wifi
Configures a Wi-Fi 2.4 GHz interface.
This group is only supported in LR54, LR54W, LR54D and LR54DWC1 products.
Syntax
wifi <1 - 4> <parameter> <value>
Parameters
state
Enables or disables the Wi-Fi 2.4 GHz interface, or enables it as an on-demand interface. The 'on-
demand' setting allows configuring the cellular interface as an on-demand interface. An on-demand
interface is brought up as needed if a higher priority goes down.
Accepted values can be one of off, on or on-demand. The default value is off.
description
A descriptive name for the Wi-Fi 2.4 GHz interface.
Accepted value is any string up to 255 characters.
ssid
Service Set Identifier (SSID) for the Wi-Fi 2.4 GHz interface. You can configure the SSID to use the
device's serial number by including '%s' in the SSID. For example, an 'ssid' parameter value of
'LR54_%s' resolves to 'LR54_LR123456.'
Accepted value is any string up to 32 characters.
security
Security for the Wi-Fi 2.4 GHz interface.
Accepted values can be one of none, wpa2-personal or wpa-wpa2-personal. The default value is
wpa2-personal.
password
Password for the Wi-Fi 2.4 GHz interface.
This element is available to all users.
Accepted value is any string between 8 and 64 characters.
