Diestro 103APV4R, Operator'S And Service Manual

Page: 69 / 133

DIESTRO 103APV4R ELECTROLYTE ANALYZER
69 JS Medicina Electrónica
2. ERROR MESSAGES
The errors that may appear during the different processes that the analyzer runs are:
Error Description Possible Cause Effect Action
Non-
CALIB
Uncalibrated
electrode. The
name of the
Electrode
is
displayed in
Red
Check the profit
and
symbols
behind the
phrase "No
CALIB"
The parameter
will
not be
measured.
● Check if there are
other symbols in
the calibration.
● Retry Calibrate.
● Change the Pack.
● Change
the
electrode.
/
The
measurement
made is not
stable
Bubbles in the
liquid circuit.
Interference
during
stabilization.
Electrode failure.
Failure in the
measurement
channel.
Unstable sample.
In calibration:
The electrolyte
will
not be
measured (not
calib.).
In
measurement:
The result is
reported
but
will not be
valid.
● Repeat calibration /
measurement.
● Check plugs on
pipes and
electrodes.
● Eliminate
any
possible sources of
interference.
● Check the valves
and peristaltic pipe.
In
the case of
electrodes with
glass capillary (Na /
pH), pass sodium
conditioner.
● Possible electronic
failure.
● Change electrode.
● If
the problem
persists, call
technical support.
?
ADC out of
range.
Bubbles in the
liquid circuit.
Interference
during
stabilization.
Electrode failure.
Failure in the
measurement
channel.
In calibration:
The electrolyte
will
not be
measured.
In the
measurement:
The result will
not be valid.
S
Low or High
Gain.
Bubbles in the
liquid circuit.
Interference
during
stabilization.
Electrode failure.
Failure in the
measurement
channel.
The electrolyte
will
not be
measured.
The calibration
slope
is
Calibration
solutions
are
Electrolytes
cannot
be
● Verify the correct
connection of the