47
»
DICTATOR Technik GmbH · +49 (0)821 246730 · [email protected] · www.dictator.de · 22.06.22
Technical manual: SQUARE 940-2
Options
Description
Add device
In this menu SCip devices can be added.
Device setup
In this menu you can configure additional devices.
Reset all
This menu resets all couplings.
Enable host
Enables and disables the host antenna.
SC-Xnet
In this menu you can configure SC-Xnet parameters.
2. Exit the pairing mode with MENU/ENTER.
To add a device select “Add Device“:
1. Select this menu and the pairing mode is activated. Activate the SCip
device. Note: If multiple devices are added, you must then activate them
without leaving the pairing mode.
5.13 WIRELESS SETUP
The new generation of the SQUARE 940-2 control system introduces the wireless system SCip.
This system is designed for fast, reliable and cost-effective connection of peripheral devices
without using physical wiring.
The Wireless Setup menu contains all necessary parameters to add, remove and configure
SCip devices. This menu is accessed from the main menu tree by pressing the MENU/ENTER
button after selecting the system setup icon. Note that some menus consist of additional menu
levels that can be accessed and navigated in the same way as on the first level.
Use UP/DOWN to navigate in SCip. Press MENU/ENTER. Navigate to the desired menu
and select again.
