Dictator SQUARE 940-2, Technical Manual

Page: 38 / 60

38
Technical manual: SQUARE 940-2
DICTATOR Technik GmbH · +49 (0)821 246730 · info@dictator.de · www.dictator.de · 22.06.22
5.12.2 Outputs
Output Description
Relay 1
Relay outputs max.
1 A @ 24 VDC
0.5 A @ 120 VAC
Only ohmic loads
Relay 2
Relay 3
Relay 4
Power Relay
Power relay output max. 5 A @ 240 VAC.
NPN 1
Open Collector max. 30 VDC, 50 mA
non-inductive
NPN 2
Output functions Description
No Function Relay not active
Door Moving Active if the output frequency is > 0.5 Hz.
Door Idle Active if the output frequency is < 0.5 Hz.
Door Open Active when the door is above the fully open position.
Door Closed Active when the door is under the fully closed position.
Door Not Closed Active when the door is above the fully closed position.
Open Partial Active when the door is open at “Part Open 1“.
Door Opening Active while the door opens.
Door Closing Active while the door closes.
Delay To Close Active while the closing timer delay is > 0.
Delay To Open Active while the opening timer delay is > 0.
Auto Close Active Active while Auto Close timer is > 0.
System Error Active if an error message exists.
Pre-Warn Active when the warning time is > Auto Close timer.
Open Alarm Active if the door is open longer than the Open Alarm timer.
Service Counter The operating counter has exceeded the value of the service counter.
Brake After Run Active at half timeout of overrun pressure - for mechanical brake (for sliding
doors with seals).
Open Light Function optimized for “door opens“ light signal.
Closed Light Function optimized for “door closes“ light signal.
Part Open Light Function optimized for door “Part Open 1“ light signal.
Mechanical Brake Active when mechanical brake is applied.
System OK Function optimised for “door opens“ light signal.