36
»
Technical manual: SQUARE 940-2
DICTATOR Technik GmbH · +49 (0)821 246730 · [email protected] · www.dictator.de · 22.06.22
5.12 SYSTEM SETUP
Submenu
Description
Timer
Setting the timer for the door controller
Outputs
Setting up the door controller outputs
Inputs
Setting up the door controller inputs
Position Sensor
Setting up the position sensor of the door control system
Reference
Selecting the references for the door position
Safety Devices
Setting up the safety edges/light barriers
Motor Config
Setting up the motor-related settings
Door Speeds
Setting the door speeds in the various states
Ramps
Setting up acceleration / deceleration
Specials
Special custom functions - Move assist/Delta Slip
System
System settings
IMPORTANT
All function-relevant parameters which are already preconfigured at
the factory are marked with a ( ) symbol on the following pages and
should only be changed by trained specialist personnel.
When changing the system setup - “Motor Config“, “Frequencies“ and
“Ramps“, it is essential to check the motor load. See point 6.2 or 6.3
Commissioning.
