Dickey-John seed manager, Operator'S Manual

Page: 50 / 71

OPERATOR’S MANUAL
Seed Manager SE
11001-1359A-200810
48 / OPERATION
SEED SPACING
Seed Spacing is the calculated average spacing between seeds in the
furrow in inches (centimeters). The resolution is in 0.1 inches (centimeters).
This function is selected by pressing the OPERATE 1 switch until the
SPACING message appears on the display. The Seed Spacing display has
several different modes based upon the Setup configuration and the scan
mode that is selected, and they are the same modes as in the Population
function. (
Figure 56 ) shows an implement average seed spacing of 2.3
inches between seeds.
Figure 56
Seed Spacing Average Display
GROUND SPEED
This is the ground speed in MPH (Km/h), with 0.1 resolution, as measured
by the ground speed sensor. This function is selected by pressing the
OPERATE 1 switch until the SPEED message appears on the display. The
ground speed sensor can be either radar, Hall Effect, or reluctance type.
(
Figure 57 ) shows a ground speed of 5.6 MPH.
Figure 57
Ground Speed Display