Dibo SBH-E, Manual

Page: 124 / 186

SBH-E : REV A DiBO n.v. 124
6. Service
6.1. General
All maintenance activities must happen at an disconnected machine and hoses without pressure .
Checking the electric components can happen exclusively by an expert.
Exclusively accessories and replacement components which have been approved by the manufacturer can be
used. Directly after the activities all securities- and protection parts must be assembled, before the machine is
put in functioning.
“a golden rule” that contributes to a perfectly working machine with few problems, is well the following:
A DAILY CONTROL AND CLEANING OF THE MACHINE FREQUENTLY DO WONDERS!
7REHDEOHWRJXDUDQWHHDSHUIHFWO\ZRUNLQJV\VWHPRQHKDV¿UVWQHFHVVDU\DUHOLDEOHDQGWHFKQLFDOZHOOFRQVLG
-
ered machine, which is then faced secondly at regular times with a thorough maintenance.
Therefore the experience and the “know-how” of DiBO a technical good working machine is insured and large
maintenance turns can be carried out by experienced DiBO technicians by means of appointment or mainte-
QDQFHFRQWUDFWZHFDQVXSSRVHLQDGYDQFHWKDWLWLVVDWLV¿HGWRWKHVHWZRSRLQWV
6.2. Maintenance diagram
6.2.1 General
The user can carry out only those actions for which in this book authorisation are given.
Each other act has been prohibited!
6.2.2. Preventive maintenance diagram
- Control of the electric cables, high and low pressure hoses and cou-
pling and control of the oil level.
After each use.
- Refreshing pump oil. First 50 hours.
&OHDQLQJZDWHU¿OWHU
Each 50 hours.
- All following refreshments of pump oil. Each 200 hours.
- Extra control/replacement of joints, valves, o- rings by acknowledged
DiBO- technicians!
Each 600 hours.
6.2.3. Control of oil level and refreshing pump oil
Check for each use of the machine the oil with the oil level glass or with the oil level bar.
Oil must stand right with the sign of the oil level glass, if the this case is not, oil tops up until the sign.
If oil looks forward to there milky, consult directly the DiBO technicians. To refresh oil, as follows work goes:
- Unbolt the drain plug below the pump.
- Unbolt the tap with the oil level bar.
- Catch all oil in a barge and remove oil like further described in the guide.
- Force up the drain plug there and top up the oil in the breach to the upper part to on the mark line.
- Force up the tap with the oil level bar there. Recommended oil: 1.836.042.
&OHDQLQJRIWKHZDWHU¿OWHUV
&OHDQWKHZDWHU¿OWHUVUHJXODUDQGUHPRYHSRVVLEOHGLUW
6.2.5. Maintenance at expense of the technicians
For further maintenance we advise to contact your DiBO distributor concerning a maintenance contract.
The maintenance applies to normal company circumstances.
At heavy circumstances you can communicate this so that can be taken into account.
Supplement documents:
Control manual
&(FHUWL¿FDWH
Electrical plans
Remarks:
It is recommend the preventive maintenance to carry out by a competent DiBO- service technician accord-
ing to this maintenance diagram, to be able to remain use the machine up to maximum and also to be able
to claim the guarantee conditions.
To be able to guarantee a good and regular maintenance, we advise the owner/user at strongest to make an
appointment with DiBO against reaching the given up company hours, concerning a maintenance turn.