Dibal Mistral M-510, User Manual

Page: 77 / 165

500 Range
49-M500WMEN25
69
MENU
5 1 5
∗∗∗∗
MENU
MENU
5 1 6
∗∗∗∗
MENU
MENU
5 1 7
∗∗∗∗
MENU
MENU
5 1 8
∗∗∗∗
MENU
PROG 515
3000
TCP RX PORT
PROG 516
01 10 01 00 12 15
MAC ADDRESS
PROG 518
255 255 255 255
GATEWAY IP ADDRESS
7.1.5.Configure the TCP RX Port [ 5 1 5 ]
1. Access to the configuration of the RX port by pressing the
MENU (2 secons) 5 1 5
2. Program Rx TCP port=3000 (always)
3. Press
∗∗∗∗
to save.
Press MENU (2 seconds) to quit the programming menu.
7.1.6.MAC Address [ 5 1 6 ]
Display the scale’s MAC address.
1. Access to the MAC Configuration by pressing the
MENU (2
seconds)
5 1 6 keys.
2. Enter the password. Consult to the Technical support.
3. Enter the MAC address in groups of two characters, pressing
X
alter the second carácter. E.g.: 01
X
10
X
01
X
00
X
12
X
15
4. Press
∗∗∗∗
to save.
5. Press MENU (2 seconds) to quit the programming menu.
7.1.7.Subnetwork Mask [ 5 1 7 ]
This sets up the subnetwork mask.
4. Enter master-slave set-up by pressing MENU (2 seconds) 5
1 7.
5. Enter the subnetwork mask progressing through three by
three characters, and press
X
after the third character. Eg:
255.
X
000.
X
000.
X
000
6. Press
∗∗∗∗
to save.
7. Press
MENU
(2 seconds) to quit the programming menu.
7.1.8.Gateway Address [ 5 1 8 ]
This sets up the gateway address.
1. Enter master-slave set-up by pressing MENU (2 seconds) 5
1 8.
2. Enter the subnetwork mask progressing through three by
three characters, and press X after the third character. Eg:
255.X 255.X 255.X 255
3. Press
∗∗∗∗
to save.
4. Press
MENU
(2 seconds) to quit the programming menu.
PROG 517
255 255 000 000
SUBNET MASK