Dibal Mistral M-510, User Manual

Page: 28 / 165

USER´S MANUAL
49-M500WMEN25
20
SHIFT F2
++++
SHIFT F2
−−−−
Use the number keys to enter the amount the customer wishes to
pay by cheque. Press
∗∗∗∗
again. If the amount entered differs from
the amount due (i.e. if it is less) a second form of payment will be
requested. This should be selected using the PLU keys (e.g. PLU
3 to pay the remainder by CREDIT).
Press
∗∗∗∗
and the receipt will be printed with CHEQUE as the first
form of payment and CREDIT as the second form (in this
example, even if the change option is enabled, the scales will not
request the amount tendered by the customer).
In any event, if the amount entered for payment by means of
the first form of payment is equal to or greater than the total due,
it is understood that the exact total is paid through one form of
payment, which is the one that has been selected.
2.3.21.Selecting a default vendor
It is possible to select a default sales assistant so that the sales
assistant key does not have to be pressed. To do this, parameter
must be set-up. (See sect. 5.1.4.3. AUTOMATIC WEIGHING)
•
If the configuration parameter automatic weighing is ‘WITH
SEL MEMO’
- Working in label mode:
The automatic weighing mode will be effected with the default
memory.
Memorisations cannot be effected on a memory that is being
used by another machine, because the latter will block the
memory.
•
If the configuration parameter automatic weighing is
‘WITHOUT SEL MEMO’:
- Working in label mode:
The automatic weighing mode will be effected without the default
memory.
2.3.22.Next Plu
If you wish to select a PLU stored in the scale it is possible to view
the different PLUs on the display.
Once selected a PLU we can see the previous and next PLU: To do
this:
1. Select a PLU.
2. To select the next one. Press SHIFT F2 +. When it finished,
it starts again.
3. To select the previous one. Press SHIFT F2 –