Dibal Mistral M-510, User Manual

Page: 62 / 165

USER´S MANUAL
49-M500WMEN25
54
MENU
3 7
PROG 3 7
CONFIGURA 7-7
CONF. OTHER
PROG 3 7 1
UNITS X 1000
NO
PROG 3 7 2
0
CODE NUMBERS
PROG 3 7 3
BEST BEFORE
ONLY PLU
PROG 3 7 4
0
ADVERTISING
5.1.7.Configuration. Others [ 3 7 ]
This programming allows to define other operative the parameters
related to the barcodes programming and printing
To enter in this menu press MENU for 2 seconds and then 3 7.
Press
∗∗∗∗
The access to the submenus it is possible by pressing the key
∗∗∗∗
or by entering directly the code of the submenu after pressing
MENU.
Change from one option to another by using F2 to go down the
menu and F1 to go up.
To exit Configuration programming, press MENU
5.1.7.1. Units x 1000
[ 3 7 1 ]
Here you decide whether in accumulative lists, the weight totals
are printed in grams or kilograms.
‘0’ – It accumulates unit sales in grams. (Default value)
‘1’ – It accumulates unit sales in kilograms.
5.1.7.2. Code Numbers
[ 3 7 2 ]
You decide how many digits you must enter to seek an article in
the scale at normal working mode. The maximum length an article
code may have is 5 digits.
‘0’ – The 6 figures of the article code are used.
‘1’ to ‘6’ – As many figures as in the programmed number are
used.
5.1.7.3. Best Before
[ 3 7 3 ]
The printing mode of the sell by date is established by setting the
values of this parameter:
‘ONLY PLU’ – It does not enable an overall sell by date to be
printed (F5). The sell by date of each PLU will be printed.
‘YES - GLOB PREVAIL’ – Permits programming of global
expiry date (F5) and global expiry date prevails.
‘ANY’ – It disables the printing of any type of sell by.
‘SI-PLU PREVAIL’ – Permits programming of global expiry
date F5) and the article expiry date prevails.
5.1.7.4. Advertising
[ 3 7 4 ]
Advertising messages can be displayed automatically on the
purchaser’s display, and, depending on the option chosen, on the
sales assistant’s display as well, if a certain length of time has
passed since the last operation was made with the scale and no
weight has been placed on the dish. The value of the parameter
to be configured here is:
‘0’ – It does not show advertising text.
‘1’ – Advertising on display in 10 seconds.
‘2’ – Advertising on display in 20 seconds.
‘3’ – Advertising on display in 30 seconds.
‘4’ – Advertising on display in 40 seconds.
‘5’ – Advertising on display in 50 seconds.