Dibal Mistral M-510, User Manual

Page: 107 / 165

500 Range
49-M500WMEN25
99
MENU
7 2 2
∗∗∗∗
PROG 7.2.2
CONF SELF – SERV
FIX CODE
11.2.2.Self-service Mode. Fix Code [ 7 2 2 ]
When working in self-service mode, an article can be fixed on:
•
The entire keyboard
•
The first row of direct keys
•
The left or right half of the keyboard
•
Each of the keyboard’s four quadrants
In the case of the first two options, the article will always be on
display on the scale, until the article is modified or changed for
another.
The code will always be on display when the scale is working.
If, for some reason, one of the article’s fields (e.g. the price)
is altered, the modification will immediately show up if the scale
is a master, and on pressing a key in the case of slave
machines.
To select and fix a code, the scale must be operating in self-
service mode.
To select a fixed code:
1. Make sure the scale is set up as master, press MENU 2
seconds.
2. Press 7 2 2.
3. Press
∗∗∗∗
4. Press C to select the operating mode.
5. Press the key of the code to be fixed
6. Press the key of the code to be fixed. If the code exists,
its data will show up on the display screen. If it does not
exist, a code error message will appear. Three seconds
later, if no other code has been pressed, the select code
message will show up again.
7. To delete the fixed code, press the C key. This particular
code will remain selected until replaced by another or
deleted as a fixed code. Once the code has been fixed,
in the case of the selection of the entire keyboard, if you
press any direct key, you will always gain access to the
fixed article, whereas with the selection of a row, by
pressing any key of the first row of direct keys, you will
access the fixed code, and by pressing any other key,
you will access the article programmed in that particular
direct key.
8. Press MENU 2 seconds to quit the programming menu.