Dibal Mistral M-510, User Manual

Page: 11 / 165

500 Range
49-M500WMEN25
3
1.4. INSTALLATION OF SCALES
Follow the instructions below to ensure correct installation and operation
of the scales.
1. Check that the mains voltage corresponds to that stated on the
specifications label on the scales and that it does not fluctuate in
excess of 10% of nominal voltage.
2. Make sure that the scales can be connected to a nearby socket
that is easy to access. We recommend that the socket should be
provided with differential breaker, thermal-magnetic trips, and
ground.
3. Make sure that other equipment such as refrigerators, cutting
machines, etc. are not connected to same socket.
4. If the scales have a battery option, see Annex Battery operation.
5. Only use the scales in areas that comply with the room
temperature values stated on the specifications label (-10ºC to
40ºC).
6. Peripheral devices connected to the equipment must be
protected against fluctuation peaks of above 8A 100VA.
7. The scales must be placed on a stable, level surface.
8. No objects must come into contact with the dish.
9. Avoid extreme temperatures. Do not place the scales in direct
sunlight or close to air conditioning vents.
10. These scales have not been designed as waterproof scales.
Therefore, avoid high levels of humidity since this might cause
condensation. Protect from rain and avoid direct contact with
water. Do not spray water on the scales or submerge in water. If
the scales get wet, switch off the power supply immediately.