59
GB
REAL TESTS
■
Only switch on the power to the receiver after closing it.
■
Carry out real tests to check that the control receiver works according to the choices made in the
“Configuration” chapter.
WHAT DO I DO IF...?
The control receiver does not work as you expected:
Check that the device to be controlled (light, flashing light, etc.) works properly without the control
receiver.
Carefully check the customised installation radio code.
Check that the microswitches are correctly positioned and pushed as far as they will go accor-
ding to the choices made in the “Configuration” chapter.
If your receiver controls a device likely to generate interference (flashing light, neon, etc.), check
that the distance between the control receiver and the device is greater than 1.5 m.
Check that the receiver is more than 5 m from the control panel, the telephone
dialler, the alarm siren and any other control receiver.
5
4
3
2
1
Switch off the power supply, open the front panel and disconnect
the device to be controlled.
Summary of Contents for RP550
Page 25: ...25 I...
Page 37: ...37 D...
