54
GB
CONFIGURATION
Configure the operating mode bar microswitches according to the application required.
Warning:
one application per receiver.
■
Application 1 -
Control lighting (or a 230 V electric device)
10
9
8
7
6
5
4
3
2
1
A
B
C
A
+
B
A
+
C
+
You want to…
Activate a light (or an electric
device) for 3 minutes in the event
of break in, fire, tamper-proofing
or emergency call.
Activate a light (or an electric
device) for 3 minutes with the
LIGHT button on your keypad
or remote control (timer mode)
Activate and deactivate a light (or
an electric device) with the LIGHT
button on your keypad or remote
control without time limit (remote
interruption mode)
A + B
A + C
Give confirmation of the OFF or
COMPLETE OPERATION (or
GROUPS A + B OPERATION)
order for your system
(application 3).
Put microswitch 5 in
this position without
changing the position
of the other micros-
witches.
Position of the
microswitches
Operation
The light is switched off either
automatically after 3 minutes or
by sending the OFF command
10
9
8
7
6
5
4
3
2
1
The light is switched off after 3
minutes.
This timer is reset by pressing the
LIGHT button again on the key-
pad or remote control.
10
9
8
7
6
5
4
3
2
1
The light is switched off by pres-
sing the LIGHT button again on
the keypad or remote control.
10
9
8
7
6
5
4
3
2
1
A + B
If the light is activated by the Light
button, it cannot be deactivated
by the OFF command.
10
9
8
7
6
5
4
3
2
1
A + C
If the light is activated by the Light
button, it cannot be deactivated
by the OFF command.
5
Brief activation (2 sec) of the light
(or electric device) each time an
Off or Complete Operation (or
Groups A + B Operation) order is
sent. If the light is already on,
confirmation is given by switching
it off for 2 sec.
The function described below can be selected with application 1.
Summary of Contents for RP550
Page 25: ...25 I...
Page 37: ...37 D...
