52
GB
CUSTOMISED RADIO CODING
■
If you are adding this receiver to your DIAGRAL alarm system and want to control a flashing light,
light, or a 230V electric device, prepare the coding tools previously used to code the other elements
of your system and move directly on to the coding operation (see Coding),
■
If you are not integrating this receiver in an alarm system (e.g. control of a 230 V device using a
key ring remote control or alarm telephone control), carry out the following operations:
Choice of code:
Copy this grid onto a piece of paper which you will destroy after coding the receiver, and put 2 -
6 crosses in the empty boxes at random. You have now determined your customised installation
radio code. It is unique and will be given to all the devices concerned by this application.
Example
(not to be used)
You will now transfer this code to the devices using the coding template and tool supplied with the
receiver.
You can change the code later, if you want to.
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
X
X
X
Summary of Contents for RP550
Page 25: ...25 I...
Page 37: ...37 D...
