53
GB
Preparation of the coding template:
The coding template is used to transfer the same
code to all devices without error. The coding
tool is used to cut the chosen connections.
Keep these tools in a safe place for future exten-
sions to the DIAGRAL alarm system.
Turn the coding template over so that you
can see the numbers 1 to 10.
Holding the template, put the sharp end of
the coding tool in the first hole corresponding to
the first cross on the grid.
Turn the tool clockwise to make a hole in the
template. Stop when the tool has completely
passed through to the other side of the template.
This hole is finished.
Repeat operations 2 and 3 for each of the
figures corresponding to a cross on the grid.
You have transferred the code onto the coding
tool.
Coding
The template has two positioning pins of dif-
ferent diameters which prevents turning it the
wrong way round during coding. Put the coding
template positioning pins into the corresponding
holes.
Hold the template and put the sharp end of
the coding tool into the first open hole in the
template. Press the tool, turning it clockwise to
break the corresponding coding connection.
Stop when the handle of the coding tool hits
against the coding template.
Repeat this operation for each hole in the
template.
Remove the template, ensuring no chips fall
into the receiver.
4
3
2
1
4
3
2
1
2
4
6
8
10
1
3
5
7
9
Drill from this side
large
positioning pin
coding tool
small
positioning pin
coding connections
configuration
microswitches
coding template
Exemple
connection
intact
Example
broken
connection
holes for the
positioning pins
1 2 3 4 5 6 7 8 9 10
O
N
4
3
2
1
Summary of Contents for RP550
Page 25: ...25 I...
Page 37: ...37 D...
