Configuring Advanced Settings / Processing Images
C
Configure the Fill settings
1
Click the [Fill and Contour] tab.
2
Select the [Fill] check box.
3
Select [Fill] or [Island Fill].
When you select [Island Fill], you need to enter the pitch* as well.
*Pitch: Interval between adjacent filling lines
4
Click [OK].
The text is filled.
IMPORTANT
When performing imprinting with a lot of lines (Island Fill, etc.) on aluminum material or the like, the
unevenness of the material surface is increased, and consequently the head cap will wear out faster.
Periodically check the state of the head cap to ensure that it is replaced as often as needed.
"
Creating/Editing a Stroke Character Font
About Stroke Characters and SFEdit2
What are stroke characters?
All stroke characters are made up of polylines and lines.
What is SFEdit2?
SFEdit2 is a program for creating and editing stroke character fonts. As all stroke characters are made up of
polylines and lines, you can add or delete anchor points and add line segments. In METAZAStudio, you can
use the stroke character fonts that are created and edited using SFEdit2.
2
Imprinting
80
