Imprinting
D
Press the laser pointer button.
The laser pointer is irradiated. If the machine is idle for 5 minutes, the laser pointer is automatically
turned off.
E
Load the material on the adhesive sheet.
Laser
Handles
Imprint
area
•
Move the unit so that laser pointer points to the center of the area to be imprinted
on the material.
•
Gently press the material as if affixing it to the adhesive sheet.
MEMO
The position to which the laser pointer points coincides with the center of the work area in METAZAStudio. By
making the position to which the laser pointer points coincide with the center of the area to be imprinted, you
can print with the exactly same layout as the one displayed on the METAZAStudio's work area.
How to Place Material
•
Place the material in a way that the center of the area to be imprinted comes to the
center of the scale on the grid table.
•
If the material is too large to fit in the grid table, use supports as necessary to keep
the material horizontal.
Adhesive sheet
Center of
imprint area
Material
Center line
Center line
2
Imprinting
63
