Appendix
|
|
devolo dLAN 200 DSpro Manual
|
82
쎲
The dLAN Link/Act LED does not light up
쑗
Make sure that there is not an analog TV amplifier without back channel
or too many T-splitters between the dLAN 200 DSpro devices that
should be communicating with each other.
쑗
Try connecting two dLAN 200 DSpro with a short coaxial cable to carry
out a quick connectivity test.
쎲
The Ethernet LED does not light up
쑗
Make sure that the dLAN 200 DSpro is connected to a device with an
Ethernet port by an RJ-45 cable, and that both devices are switched on.
쎲
Safety instructions
쑗
In order to switch the device off completely, pull the power cable out of
the socket.
쑗
Never install the devices in a wet location or close to radiators/heat
sources.
쑗
Never use the device outside.
쑗
Do not remove the device case under any circumstances.
Summary of Contents for dLAN 200 DSpro
Page 1: ...dLAN 200 DSpro Manual...
