|
Telnet to the dLAN 200 DSpro Adapter
15
|
devolo dLAN 200 DSpro Manual
|
DWRONG_ACKS=1 DCOEX_ESCALABLE=1 -DNEW_BCAST -
DUSE_ARC_TIMER=0 -O2
Type 'h' for help
#user@/>
Figure 6: General
Information Provi-
ded by the Adapter
FIRMWARE VERSION alma_dr100_ha v2_8_48_cvs running Com-
piled on jue dic 2 18:34:13 CET 2004 by dferruz@sapporo
EXTRA_FLAGS=-DBPC_DEBUG -DSNR_MODE_TRAINING=1 -
DSNR_MODE_MONITORING=1 -DWRONG_ACKS=1 - DCOEX_ESCALABLE=1
-DNEW_BCAST -DUSE_ARC_TIMER=0 -O2
Type 'h' for help
OK #user@/>i
Slave Access
MAC: 00:50:C2:12:6E:13
IP: 192.168.1.2
SYNC: -MODE: 5 AGC
RX: enabled RXG = 0 AGC TX: disabled TXG
= 1
ACCESS PROTOCOL: DO_NOTHING
AUTOCONFIGURATION: DONE
AVAILABLE CONNECTIONS:
-------------------------------------------------------
EXTA: 100 Mbps Forwarding
-------------------------------------------------------
MAC PHY TX XPUTPHY RX XPUT BR STATE
-------------------------------------------------------
Number of boots: 32
OK #user@/>
Several important things are reported with this command:
쐃
MAC mode(whether the dLAN 200 DSpro adapter is in master, slave or
repeater mode)
쐇
MAC address of the dLAN 200 DSpro adapter
Summary of Contents for dLAN 200 DSpro
Page 1: ...dLAN 200 DSpro Manual...
