|
Auto-configuration
57
|
devolo dLAN 200 DSpro Manual
|
쎲
NTP_TIMEZONE = [-12 - 12] * 60
Time zone for the NTP clock server. 0 corresponds to Greenwich. Default
value: 0.
쎲
NTP_DST = [yes | no]
Time correction for daylight savings time. Applied if yes. Default value: yes.
12.8.4.14 Custom VLAN/OVLAN Parameters
쎲
USE_CUSTOM_VLAN_OVLAN = [yes/no]
This parameter enables other VLAN/OVLAN parameters. Default value: no.
If set to no, the previous configuration is used. If set to yes, it will configure
the parameters that are set in the autoconfiguration file. If set to yes, the
connection will be lost if the new parameters are not properly configured in
the autoconfiguration file. It is necessary to specify several parameters with
care or no connection will be possible between the dLAN 200 DSpro adap-
ters.
As a general rule, this configuration overrides the basic VLAN/OVLAN con-
figuration. In order to decrease the risk of loosing the connection, the
VLAN/OVLAN filtering follows these rules:
쑗
When the list is ALLOWED, the tags specified here are added to the exis-
ting ones. This solution simplifies the configuration and decreases the
risk of misconfiguration.
쑗
When the list is FORBIDEN, the lists are reset before inserting the tags
specified here, for the same reasons.
The VLAN/OVLAN custom configuration must be complemented with the
profile parameters referring to VLAN/OVLAN to configure interfaces diffe-
rent from EXTA, EXTB, ROOT and OTHERS.
Custom VLAN Parameters
쎲
VLAN_FILTER_INGRESS = [yes/no]
VLAN filtering using input interface. By default only egress filtering (output
interface) is performed. Default value: no.
쎲
VLAN_TAGGED_ONLY_IFACE_ROOT = [yes/no]
Drops packets without a VLAN tag entering the root interface
(IFACE_ROOT). Default value: no.
Summary of Contents for dLAN 200 DSpro
Page 1: ...dLAN 200 DSpro Manual...
