Auto-configuration
|
|
devolo dLAN 200 DSpro Manual
|
40
12.8
Autoconfiguration File
12.8.1
Introduction
An autoconfiguration file contains the configuration parameters needed by each
node.
In the case of MV nodes, there are no parametric values. These MV autoconfi-
guration files are specific for each node and contain the translation table for the
MV, LV and end user nodes hanging from each MV node. There is a particular
file for each MV node.
As stated before, LV, EU and certain MV nodes have parametric autoconfigura-
tion files. For this reason, all EU nodes, with no specific quality of service or
VLAN/OVLAN configuration, could use the same autoconfiguration file. Thus,
LV nodes with no specific QoS or VLAN/OVLAN parameters should receive a dif-
ferent generic file. The network operator can use specific configuration files for
non-generic LV, EU and MV nodes.
12.8.2
Parameter Types
There are three types of parameters inside the autoconfiguration file:
쐃
Scalar:
PARAMETER = value
쐇
List:
PARAMTER.index1 = value
쐋
Table:
PARAMETER.index1.index2 = value The first valid index for lists and
tables is 1.
12.8.3
Parameter Format
The format of the parameters is:
쎲
PARAMETER_LABEL[.x][.y] = value
For constant parameter values.
쎲
PARAMETER_LABEL[.x][.y] = %parametric_value
For parametric parameter values.
For example, the following parameter could be inside an end user autoconfigu-
ration file:
VLAN_DATA_TAG = 452
or
Summary of Contents for dLAN 200 DSpro
Page 1: ...dLAN 200 DSpro Manual...
