DETEWE OPENPHONE 61 User Manual Download

Page: 52 / 80

Programming the Call Keys

Team Functions

Accepting Calls with a Trunk

Key:

Another team member presses

the trunk key to which the call
number 11 has been assigned.

For information on how to program
the function keys, please refer to the
chapter entitled

Programming Func-

tions

starting on page 68.

Programming the Call Keys

The call keys are configured in the

Configurator

on the OpenCom 100

Web console. For

system tele-

phones

, you can configure the fol-

lowing:

■

the type of key (trunk key, team
key, busy key or direct call key),

■

the telephone number and the
text currently assigned to the
key,

■

the call signalling mode for this
key.

You can change the pre-settings for
the text and the call signalling mode
on the appropriate key’s MenuCard
(see

MenuCard “Trunk Key”

page 48,

MenuCard “Team Key”

page 49, and

MenuCard “Busy Key”

on page 50) as well as most of the
settings for supported features.

If the configuration of a call key is
changed in the

Configurator

, the

terminal will load the new settings
and be out of action for a a few
moments. For more information on

the configuration, refer to the online
help of the OpenCom 100.

MenuCard “Trunk Key”

Press and hold down the trunk key

for a moment, then select …

1 Modify text

: You will see the

text currently assigned to the key.
This text is displayed on your tele-
phone. To change the text, press

. Delete the existing text with

the

key and enter new text,

if required. Press

and con-

firm this with

Save

. If you delete the

text without entering any new text,
only the key’s call number will be
displayed.

2 Call diversion

: You can

configure one or more types of
call diversion for the trunk key
(

Immediately, After delay,

Busy

). Proceed as with Divert phone

(see

MenuCard “Call forwarding”

starting on page 56). The call
diversion mode configured for a
trunk key only applies to that key,
not the terminal.

op6365_gb.book Seite 48 Mittwoch, 28. August 2002 11:09 11

Summary of Contents for OPENPHONE 61

















































































Search results

Summary of Contents for OPENPHONE 61

Reviews:

Related manuals for OPENPHONE 61

Brands by name

Popular brands

DETEWE OPENPHONE 61, User Manual

Search results

Summary of Contents for OPENPHONE 61

Reviews:

Related manuals for OPENPHONE 61

Brands by name

Popular brands