DETEWE OPENPHONE 61 Page 41 User Manual Download

Page: 41 / 80

Making Calls

Consultation, Toggling, Transfer and Conference

■

by means of the additional
menu

9 Voicebox

in the Main

menu (see

MenuCard “Voicebox”

on page 65).

Note:

For detailed information

on the utilisation and operation of
OpenVoice, please refer to the add-on
guide “OpenVoice – The Voicemail
System in the OpenCom 100 Commu-
nications System”.

Consultation, Toggling, Transfer and
Conference

Consultation/Toggling by
means of the R Key or
Another Call Key

During a call, press the R key

(display in the Info line) and

dial

the internal or external telephone
number (for manually-seized exter-
nal calls with an external line seizure
code digit, e.g.

; see

page 26),

press another call key to consult

with a team member.

The original call is put on hold while
you are consulting with the third
party.

To toggle (i.e. switch backwards

and forwards between the call par-
ties), press the key of the waiting
party (the LED and arrow symbol on
this key flash slowly).

End consultation/tog-

gling by replacing the handset or
pressing the disconnect key (on the
OpenPhone 63/65).

Then press the key of

the call on hold.

You are now reconnected to the

waiting party.

Transferring an Internal/
External Call to an
Internal Subscriber

You have dialled an internal consul-
tation call (see

Consultation/Toggling

by means of the R Key or Another Call
Key

on page 37). When the user an-

swers,

G h

inform them of the call trans-

fer and hang up.

If the user does not answer,

op6365_gb.book Seite 37 Mittwoch, 28. August 2002 11:09 11

Summary of Contents for OPENPHONE 61

















































































Search results

Summary of Contents for OPENPHONE 61

Reviews:

Related manuals for OPENPHONE 61

Brands by name

Popular brands

DETEWE OPENPHONE 61, User Manual

Search results

Summary of Contents for OPENPHONE 61

Reviews:

Related manuals for OPENPHONE 61

Brands by name

Popular brands