DETEWE OPENPHONE 61 Page 36 User Manual Download

Page: 36 / 80

Making External/Internal Calls

Making Calls

Making External/Internal Calls

If you hear an external dialling tone
when you lift the handset, your tele-
phone is set to

automatic

seizure of

the external line. If you hear an in-
ternal dialling tone when you lift the
handset, your telephone is set to

manual

seizure of the external line.

You will find a representation of the
audio signals on the inside of the
back cover.If you hear the internal
dialling tone, you must dial the

ex-

ternal line seizure code digit

(pre-

setting:

) before dialling the

external telephone number. Your
system administrator configures this
code digit for all subscribers on the
OpenCom 100 system and will tell
you what value is currently valid.

Note:

This also applies to all con-

sultation calls and diversions to exter-
nal destinations, but not to “Divert
MSN.”

Making an External Call

with Automatic Line Seizure

Lift the handset

(your call key is seized)

and/or

press the particular call key

(hands-free mode - only on the
OpenPhone 63 and 65).

Dial the external number.

with Manual Line Seizure

Lift the handset

(your call key is seized)

and/or

press the particular call key

(hands-free mode - only on the
OpenPhone 63 and 65).

Dial the external line seizure code

digit (presetting:

) and then

the external telephone number.

Making an Internal Call

with Automatic Line Seizure

Lift the handset

(your call key is seized)

and/or

press the particular call key

(hands-free mode - only on the
OpenPhone 63 and 65).

Press the star key twice ...

and dial the internal number

with Manual Line Seizure

Lift the handset

(your call key is seized)

and/or

press the particular call key

(hands-free mode - only on the
OpenPhone 63 and 65).

Dial the internal number.

op6365_gb.book Seite 32 Mittwoch, 28. August 2002 11:09 11

Summary of Contents for OPENPHONE 61

















































































Search results

Summary of Contents for OPENPHONE 61

Reviews:

Related manuals for OPENPHONE 61

Brands by name

Popular brands

DETEWE OPENPHONE 61, User Manual

Search results

Summary of Contents for OPENPHONE 61

Reviews:

Related manuals for OPENPHONE 61

Brands by name

Popular brands