DETEWE OpenPhone 26 User Manual Download Page 26

Page: 26 / 116

Your Telephone's Features

Softkeys and Other Keys

2.7.2 Softkey: OK

Press

to confirm the selected function.

If a function only has one quick-switch option, it is operated by this key. Active set-
tings (ON) are indicated by a “ ” next to the relevant item; inactive settings (OFF)
are indicated by a “-”.

2.7.3 Softkey: Esc

Press the

Esc

softkey

briefly

to exit the section of the menu currently displayed.

You will then see the selection from the previous menu or the current idle or call
display.

When you navigate within the menu and

press and hold

the

Esc

softkey the

menu closes and the telephone is in idle state again.

2.7.4 Softkey: Redial

Allows you to select a telephone number from the redial list.

If a selection list (e.g. phone book or
menu) is displayed, you can use the
arrow keys to scroll to the desired entry.

If a continuous text is shown (e.g. a
message), you can scroll up and down
through the text with the arrow keys.

During a call you can change the
volume of the receiver/loudspeaker
using the arrow keys (with the
OpenPhone 27 also the volume of the
headset).

OpenPhone 26

OpenPhone 27

Function

Summary of Contents for OpenPhone 26





















































































































Search results

Summary of Contents for OpenPhone 26

Reviews:

Related manuals for OpenPhone 26

Brands by name

Popular brands

DETEWE OpenPhone 26, User Manual

Search results

Summary of Contents for OpenPhone 26

Reviews:

Related manuals for OpenPhone 26

Brands by name

Popular brands