DETEWE OpenPhone 26, User Manual

Page: 18 / 116

Your Telephone's Features Commissioning
16
When the battery has been replaced, the charge level is not correctly
displayed until a whole charge and discharge cycle has been completed.
When the handset is in the charging station, the flashing or lit sections indicate
charging and the charge level.
Charge warning
When the battery capacity is nearly exhausted, the battery symbol will flash in the
display.
If you are making a call at the time, you still have up to three minutes of talk time
before the handset switches itself off. If you are not making a call and the handset
is not in the charging station, “Battery empty” appears in the display. You can no
longer make a telephone call now.
2.5 Commissioning
2.5.1 Handset Subscription (Checking In)
Your handset can be operated in up to ten different communications systems. To
be able to do this, it must be subscribed to every system, this means: the handset
must be checked in.
Normally the check-in operation is performed when commissioning the handset.
If you are operating your handset in the OpenCom 100 communications system,
checking in your handset will be done by your system administrator.
For the communications systems of other manufacturers:
Enrol your handset in the communications system as described in the chapter
“Phone settings” Menu starting on page 75 (section “System”).
2.5.2 Background Information
Checking in
The OpenCom 100 check-in operation for handsets is initiated via the Web
console, either by the system administrator or by a user with administrator rights.
You will need the following information if you wish to subsequently subscribe a
handset yourself.