Designability WizzyBug Instructions For Use Manual Download Page 64

Page: 64 / 72

Specification

Powered Wheelchair Classification (EN 12184)

Class B, Indoor and Outdoor

Max weight of user

20.0kg / 44lbs

Total weight of vehicle, Lead Acid / Nickel MH
Total weight of vehicle, LiFePO4

33.5kg / 74 lbs
30.8kg / 68 lbs

Weight of heaviest part (body)

16.4kg / 36 lbs

Turning Circle

470mm / 18.5in

Overall width of vehicle

560mm / 22in

Overall length of vehicle

650mm / 25.6in

Overall height (headrest not fully extended)

870mm / 34.3in

Minimum width of corridor in which Wizzybug can
be turned to be facing in the opposite direction

900mm / 35.4in

Seat width

235mm / 9.3in

Seat depth

155mm - 245mm or 6.1 - 9.7in

Seat height

360mm or 14.2in

Backrest height

410 - 430mm

Backrest angle

Adjustable from 90 - 97°

Seat Plane Angle (Tilt)

0 - 15°

Footrest to seat

150mm - 275mm or 16.1 - 10.8in

Leg to seat surface angle

90°

Obstacle climbing and clearance

40mm / 1.6in

Dynamic stability

Uphill 13°

Static stability

Downhill 21°, Sideways 11°

Maximum speed, SLA
Maximum speed, NiMH
Maximum speed, LiFePO4

2.9 kmph / 1.8 mph
3.0 kmph / 1.9 mph
3.1 kmph / 2.0 mph

Approximate range, SLA

Approximate range, NiMH
Approximate range, LiFePO4

6 km / 3.7 mi

12 km / 7.5 mi
9 km / 5.6 mi

Lead Acid Battery (SLA)
Nickel Metal Hydride Battery (NiMH)
Lithium Iron Phosphate Battery (LiFePO4)

24V, 9Ah, 6kg
24V, 15Ah, 6kg
25.6V, 10 Ah, 2.8 kg

Maximum continuous current (by circuit breaker) 10A
Measured sound power level

Indoor <65dB, Outdoor <75dB

Ingress Protection

IPX4

Resistance to ignition of upholstered parts

ISO 8191-2:1988

Fig. 84 Specifications

Summary of Contents for WizzyBug









































































Search results

Summary of Contents for WizzyBug

Reviews:

Brands by name

Popular brands

Designability WizzyBug, Instructions For Use Manual

Search results

Summary of Contents for WizzyBug

Reviews:

Brands by name

Popular brands