Designability WizzyBug Instructions For Use Manual Download Page 51

Page: 51 / 72

CHARGING AN SLA BATTERY

Put the silver connector into the charging

socket

in the front face of the joystick

Switch on Wizzybug using the
on/off switch at the back, then

switch on the joystick.

Plug the charger into a mains socket and switch the socket on.

The red power light on the charger will come on.

For a Prolite E charger

, a second LED will come on

after a few seconds: Red indicates that the battery is

charging and yellow shows the battery is about 80%
charged. When the battery is fully charged a

green light will show.

For a Numax charger

, the orange LED shows

the battery is charging. When the battery is

fully charged a green light will show.
(When Wizzybug is being charged the lights on
the battery indicator on the joystick control

will scroll and flash. The joystick cannot be

used and Wizzybug cannot be driven.)

You can keep the charger connected until you need to use

Wizzybug. You cannot overcharge the lead acid battery.

When you are ready to disconnect the charger, turn off the

mains supply first, then switch off the joystick’s on/off button.

Unplug the charger from the mains supply, then unplug the

silver connector from the front of the joystick.

If you use Wizzybug every day, we recommend that you charge it

every day.

Fig. 77 Charging an SLA Battery

Prolite E Charger

Numax Charger

Summary of Contents for WizzyBug









































































Search results

Summary of Contents for WizzyBug

Reviews:

Brands by name

Popular brands

Designability WizzyBug, Instructions For Use Manual

Search results

Summary of Contents for WizzyBug

Reviews:

Brands by name

Popular brands