manualshive.com logo in svg

Designability WizzyBug, Instructions For Use Manual

Share
Download
Designability WizzyBug Instructions For Use Manual Download Page 56

56 

Transportation 

Wizzybug has not been crash tested for use in a vehicle.  
 

You must not allow any child to be seated in 
Wizzybug while it is in a vehicle. 
 
The Wizzybug seat must only be used in Wizzybug and 
never used separately. 

TRAVELLING BY CAR 

Depending on the size and style of the car, it may be possible to 
transport Wizzybug in one piece. Make sure Wizzybug is stored 
securely in the boot of the car and cannot move around while the 
car is moving. 
 

When transporting Wizzybug in a vehicle, make sure that both of 
the front wheels are engaged

. If the wheels are not engaged, 

move the levers on the sides of the wheels to the opposite 
position (refer to page 28). Lift Wizzybug one side at a time and 
rotate each front wheel forwards by hand until it locks. 
 
If your vehicle has a spare seat strap, this can be used to secure 
Wizzybug by wrapping the belt across the red body and fastening 
it into the seatbelt socket. 
 
Wizzybug can also be transported in several pieces (see page 25). 

HOISTING 

There are no designated hoist points on Wizzybug. If you intend 
to hoist Wizzybug, please contact Designability for advice. Please 
refer to good moving and handling guidelines for further advice: 

https://www.nhs.uk/live-well/healthy-body/safe-lifting-tips

. 

Summary of Contents for WizzyBug









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands