manualshive.com logo in svg

Designability WizzyBug, Instructions For Use Manual

Share
Download
Designability WizzyBug Instructions For Use Manual Download Page 46

46 

Metal Tray 

The metal tray is an optional extra supplied in some countries.  
 
The tray is designed to allow a child to drive Wizzybug using 
large button switches (see page 47) instead of a joystick, and is 
easy and quick to remove.  
 
The tray will be set up to fit on one side of Wizzybug (left 

or

 right) 

–

 it cannot be moved to the other side without using tools. If you 

need to change the side the tray fits to, contact Designability or 
your Wizzybug provider using the contact details at the start of 
these instructions. 
 
If your Wizzybug has a metal tray, it will also be supplied with a 
replacement armrest plate (including a tray mounting block and 
an attached handrest). You can only attach the tray if this 
replacement armrest plate is already attached to Wizzybug. 
 
To attach the tray to the end of the armrest: 

1.

 

Find the black stopper 
under the round handrest 
and pull it to release the 
handrest. 
 

2.

 

Lift the handrest out of its hole and leave it to 
hang by its rubber strap.  
 

3.

 

Lower the tray pin into the handrest hole and 
push the tray down until it clicks into place. 

To remove the tray, use the black stopper to 
release the tray and replace the handrest. 

 

Fig. 68 Fitting the Tray

 

Summary of Contents for WizzyBug









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands