34
To make the seat depth smaller:
1.
Unclip the carer control from the back of the headrest and
raise both armrests (see page 24).
2.
Turn the white dial fully anti-clockwise to unlock the seat.
3.
Make sure that the seat pins are in the highest position in the
metal grid before you start to adjust the seat depth. If the seat
pins are not already in the highest holes, use your thumb to
squeeze the black seat release knob towards the white dial
and lift the seat so that the seat pins line up with the top
holes. Release your thumb so that the pins fit into the top
holes. (see Fig. 30 on page 32).
(If the pins do not fully fit into the holes, check that the front
corners of the seat are sitting in the two metal slots above the
front of the battery compartment, and check that the white
dial is fully unlocked.)
4.
Squeeze the black seat release knob and
lift the whole seat up and forward
into
the top of the next coloured slot in the
metal grid. (Only move the seat forwards
by one coloured slot at a time.) Let go of
the seat release knob so that the seat
pins fit into the top holes.
Fig. 33 Moving the Seat Forward
