20
FOOTREST
The footrest can be attached before or after the child is seated.
The footrest can be level or can be tilted to match the tilt-in-
space angle of the seat
position. Ideally your child’s feet should
sit flat on the footplate.
The height and angle of the footrest can be adjusted using the
colour codes at the back and sides of the footrest. To make the
footrest level, choose your child’s footrest height colour
at the
back of the footrest, look for the two side slots of the same
colour, and choose the lowest of those two slots.
To tilt the footrest upwards or downwards, choose higher or
lower slots at the sides of the footrest.
To attach the footrest:
1.
Squeeze together the bars under the footrest.
2.
Push the footrest into the chosen central slot.
3.
Line up the footrest with the chosen side slots,
then let go to fix the footrest into the side
slots.
Make sure the footrest is fixed in the correct
position for your child before using Wizzybug
Fig. 14 Attaching the Footrest to Wizzybug
(From top to bottom) Footrest bars, height of the footrest -
showing the back-plate with the coloured slots, footrest tilt
adjustment using the side slots.
