Designability WizzyBug Instructions For Use Manual Download Page 62

Page: 62 / 72

Troubleshooting

Problem

What to do

If this does not work

1. The joystick does not

turn on.

1. Check the on/off switch at

the back of Wizzybug.
2. Check the battery is
connected (see p19).

3. If the battery is nickel metal
hydride, remove the battery
and press button that says

“Push to test”

(see p52). If this

indicates zero power re-
connect it to Wizzybug.

Stop using Wizzybug

and phone
Designability for help

2. The joystick
controller is not

working. When the
on/off button is
pressed, a red, amber

and green light flash
three times together

(LiNX).

The joystick has been locked.
Press the horn twice within

ten seconds to unlock it. A
beep will confirm it is
unlocked.

Stop using Wizzybug
and phone

Designability for help

3. The on/off button on

the joystick is flashing
red

(LiNX).

This indicates a fault code.

Turn the joystick controller
off and on again.

Count the number of

flashes and phone
Designability for help.

4. The red light flashes
on the joystick battery

indicator

(LiNX).

Turn off all power (including
the lights) and recharge the

battery.

Stop using Wizzybug
and phone

Designability for help.

5. The on/off button on
the joystick flashes red

AND it beeps loudly
once every 10 seconds

(LiNX).

This indicates that the battery
is completely flat. Turn off all

power (including the lights)
and fully recharge the
battery.

Stop using Wizzybug
and phone

Designability for help

The joystick

controller is not
working. When the
on/off button is

pressed, a padlock
symbol is displayed on
the screen

(LiNX Plus)

The joystick has been locked.

Turn the joystick controller on
using its on/off button and
press and hold both buttons I

and II for several seconds

Stop using Wizzybug

and phone
Designability for help

Summary of Contents for WizzyBug









































































Search results

Summary of Contents for WizzyBug

Reviews:

Brands by name

Popular brands

Designability WizzyBug, Instructions For Use Manual

Search results

Summary of Contents for WizzyBug

Reviews:

Brands by name

Popular brands